border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Enclosure Creation Forums > General Enclosure Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 08-22-10, 03:55 PM   #1
Duke82
Member
 
Join Date: Aug-2010
Posts: 2
Country:
Need help making rack for my BP's

I will be getting 3 ball pythons from a friend who breeds them in a couple days. They are around 2 years old I think. The questions I have for you guys are. Do they get stressed if they are in to big of a cage for there age/size. I only ask because I went out and bought 41q 35 X 16.5 X 6.125 sterilite bins for them. I did this after reading they need the space but did not put 2 and 2 together till just now that maybe they will do better in smaller cage till they get bigger. Also I planned on using flexwatt tape for heating on a thermostate, any tricks of running that. I have 3 strips that are 6ft long and 3.5in wide I used to use them for my roaches when I had alot of beardies some years back. I was planning on running 2 strips on each side. But not sure if I should put some aluminum foil or something inbetween the plastic and the heat tape. Sorry for such a long post.
Duke82 is offline  
Login to remove ads
Old 08-22-10, 07:28 PM   #2
infernalis
Moderator
 
infernalis's Avatar
 
Join Date: May-2008
Location: Central New York State
Age: 60
Posts: 16,536
Country:
Re: Need help making rack for my BP's

Welcome...

as for space, just as long as there is a hide and water bowl you should be fine.

I have never used flexiwatt with a tote.
__________________
"Where would we be without the agitators of the world attaching the electrodes
of knowledge to the nipples of ignorance?"
infernalis is offline  
Old 08-22-10, 07:35 PM   #3
Freebody
Veteran Member
 
Freebody's Avatar
 
Join Date: Aug-2008
Location: Surrey BC
Age: 42
Posts: 2,379
Country:
Re: Need help making rack for my BP's

welcome to the forum
Freebody is offline  
Old 08-22-10, 08:37 PM   #4
derekcm87
Member
 
derekcm87's Avatar
 
Join Date: Feb-2010
Posts: 257
Country:
Re: Need help making rack for my BP's

As mentioned just provide a hide on both ends of the cage and maybe some fake leaves (from dollar tree or a hobby lobby) going from one end to another to provide security when going from one side to another. But actually if they are two years old I wouldnt think the cage size is that big of deal. As far as the flexwatt. I dont think you need to use all of what you have. One strip should due fine maybe two of them? No need to put foil tape between the flexwatt and the tub. Just use the foil tape to tape the flexwatt to the rack and thats it. No real tricks to using flexwatt with a thermostat. Just plug the flexwatt into the thermostat and set the thermostat to the desired temp and place the probe against the heat tape and test the temps with an infrared temp gun if you have one. If not, they are a great and essential tool to have and you can get them for cheap. Good luck.
derekcm87 is offline  
Old 08-23-10, 01:55 PM   #5
Duke82
Member
 
Join Date: Aug-2010
Posts: 2
Country:
Re: Need help making rack for my BP's

Awsome, well ill stick with the larger totes then and add more cover for them if I see them stressed.

Thanks
Mike
Duke82 is offline  
Login to remove ads
Closed Thread


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:13 PM.

Powered by vBulletin®
©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.

right