border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Enclosure Creation Forums > General Enclosure Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 03-15-05, 08:16 PM   #1
king nick
Member
 
Join Date: Jul-2004
Location: ontario
Age: 35
Posts: 193
Country:
Send a message via MSN to king nick
can i use "wild" wood in my cages?

I live out in the sticks (country) and there are lots of old dead oak trees here that Im really tempted to take a piece and ut it in with one of my snakes cages. Is there a way to clean the wood so its safe 2 use, all the barks gone so it would be perfect.

nick
__________________
0.0.1 Mali uromastyx , 0.0.1 Nigerian uromastyx , 2.3.0 Leopard geckos 0.0.1 savannah monitor 0.2 African clawed frogs , 0.0.1 pac man frog, 0.0.1 tomato frog , 0.0.1 whites tree frog , 0.0.2 Corn snakes , 1.1.0 Hog Island boa, 2.0.1amazon tree boas
king nick is offline  
Login to remove ads
Old 03-15-05, 08:27 PM   #2
Omega Red
Member
 
Join Date: Mar-2005
Location: Victoria, BC
Posts: 19
maybe you could try freezing it - that would kill any bacteria that may be on it.
i'm not sure though, hopefully someone has a definitive answer.
Omega Red is offline  
Old 03-15-05, 08:30 PM   #3
Shad0w
Member
 
Join Date: Aug-2004
Posts: 959
I use wild wood.. but I wash and then bake them in the oven for 3 hours before I use them.

If you do the same.. be careful not to start a fire

I usually have the oven set to 350.
Shad0w is offline  
Old 03-15-05, 09:25 PM   #4
latazyo
Member
 
latazyo's Avatar
 
Join Date: Dec-2003
Posts: 832
Country:
I just rinse and put it in mine
latazyo is offline  
Old 03-16-05, 09:21 AM   #5
Invictus
Member
 
Invictus's Avatar
 
Join Date: Jun-2003
Location: Calgary, AB
Age: 48
Posts: 5,638
Send a message via MSN to Invictus
Rinsing absolutely will not cut it.

I'd soak it in bleach water for 3 hours, then in SALT water (use sea salt if you can get it, because it has no iodine) for 3 hours. The salt will dilute the chlorine in the bleach.

If you want to maintain 100% of the color, soak it, freeze it for a day, then bake it. What the freezer doesn't kill, the baking will. Soaking and freezing it ahead of time also makes sure that the wood is moist enough to not ignite in the oven.

If you want to smooth it out, you'll have to get it sandblasted, or spend a good deal of time with a power sander. I'd also recommend sealing it with polyeurethane if the enclosure will have moisture - wood can grow mold like a sonofabitch.
__________________
- Ken LePage
http://www.invictusart.com
http://www.invictusexotics.com
Invictus is offline  
Login to remove ads
Old 03-16-05, 09:40 AM   #6
havenbounce
Member
 
havenbounce's Avatar
 
Join Date: Jan-2003
Location: Ottawa
Posts: 147
Ken you are so right. You should always soak things in a bleach water solution. (this also works on cages that might have housed sick animals before and it's the only thing that will kill parvo ...a fatal puppy illness) I never thought of the salt soaking after to get some on the bleach out though...Thanks Ken. I'll have to try that one.
Ginnette
havenbounce is offline  
Old 03-16-05, 09:42 AM   #7
WALTER
Member
 
WALTER's Avatar
 
Join Date: Jul-2002
Location: Red Deer AB
Age: 53
Posts: 304
Ok lets get real here.
You think they do anything special for the wood you get in the store? They wash it. Then it sits in a warehouse just to be contaminated again by other stuff.
Depending how big the wood is, just bleach it, then rinse in hot or boiling water. Freezing will not do anything, since what ever is living in the wood during the summer does usually survive the winter.
I bleach then put in the shower on just hot water for about 10-15 min. Never had a problem and been doing it that way for years.
__________________
WALTER @ Mice & Things
www.miceandthings.ca
www.reptileshowandsale.com
WALTER is offline  
Old 03-16-05, 10:13 AM   #8
DragnDrop
Member
 
Join Date: Jul-2002
Location: Ontario Cda
Posts: 3,234
Country:
Reading about what you all do to deparasitize wild caught wood makes me want to only use CB branches

Like Walter said, let's get real.

Bugs will be easily seen, they'll be under the bark or leave holes and tunnels. A solid branch or log with no holes or decay will be solid wood through and through, no need to kill off cooties inside, it's wood. Anything that can live inside this solid wood would be bacteria, virus and the like - and just plain rinsing with hot water, boiling for a few hours or freezing in a home freezer isn't going to kill them off - they survived all winter in the wild, and in Canada it's guaranteed colder out there for longer during the winter than a few days in the typical freezer. How long does it take to boil a chunk of wood to get the inside temperature hot enough to kill off parasites and germs?

Get a good solid log or branch, no bug tunnels, no rot nor decay, a nice solid chunk. If you want the bark left on, then rinse off the outside dirt, spider webs, cocoons etc. As long as the bark is firmly attached, it's okay to use, if it's loose there could be bugs hiding behind it, so remove the bugs or bark or get another piece.

I've used wild caught branches, logs and bark for at least a decade, and never had a problem. I make sure it's in good condition, then just scrape and rinse all the crud off. Once it's dry, I use it.
DragnDrop is offline  
Old 03-16-05, 11:02 AM   #9
Shad0w
Member
 
Join Date: Aug-2004
Posts: 959
LOL WC vs CB branches.. I LOVE IT
Shad0w is offline  
Old 03-16-05, 01:21 PM   #10
latazyo
Member
 
latazyo's Avatar
 
Join Date: Dec-2003
Posts: 832
Country:
thanks Walter and Dragon

certainly we could assume that a person would have the common sense to not use a piece of living wood or a piece of wood that is all covered in mud down by the river

most of it is dry driftwood, which looks better anyways...give it a rinse and watch the mud and paranoia go down the drain

I believe your decade of experience speaks more than heresay about the dangers of wild caught wood

On a non-paranoid side note, bleaching the wood makes it a little brighter and better looking in my opinion, but I'd never bleach to "sanitize" it
latazyo is offline  
Login to remove ads
Old 03-16-05, 01:27 PM   #11
joey
Member
 
joey's Avatar
 
Join Date: Oct-2004
Location: weird planet called earth
Posts: 944
I'd be afraid of the chemical residue left from the bleach...nasty s***. Where I live there are nice branches everywhere---the best are the ones that have no bark what-so-ever.....very clean, dry and solid. My snakies love to climb on them. "WC" branches are the best. lol
__________________
Partnership for a idiot free America
joey is offline  
Old 03-16-05, 01:59 PM   #12
Invictus
Member
 
Invictus's Avatar
 
Join Date: Jun-2003
Location: Calgary, AB
Age: 48
Posts: 5,638
Send a message via MSN to Invictus
The "chemical residue" you speak of is chlorine... which is solved by soaking it in salt water.

The risk of using wildwood is not the obvious parasites and ticks, it's the microbial life that exists on it. If you want to take your chances by just rinsing it, go ahead. I'd never do that.
__________________
- Ken LePage
http://www.invictusart.com
http://www.invictusexotics.com
Invictus is offline  
Old 03-16-05, 02:07 PM   #13
DragnDrop
Member
 
Join Date: Jul-2002
Location: Ontario Cda
Posts: 3,234
Country:
Chlorine is actually very unstable, it will self-destruct if you leave it alone. Just airing out the branch for a day will get rid of the residual chlorine, or you can neutralize it immediately with vinegar. Soaking in plain water will work too. If salt water solves the chlorine residue, then would there be any need to dechlorinate water for marine tanks?
DragnDrop is offline  
Old 03-16-05, 03:49 PM   #14
Invictus
Member
 
Invictus's Avatar
 
Join Date: Jun-2003
Location: Calgary, AB
Age: 48
Posts: 5,638
Send a message via MSN to Invictus
DOH! All this time I've been saying to use salt water, and what I was really supposed to be suggesting was vinegar. I know there is a reason to use salt water after bleaching though.. it was told to me by a science teacher. But damned if I can remember what that reason is.

As soon as you mentioned dechlorinating marine tanks, I got to thinking back to my geology classes... and remembered that salt, also called Halite in its rock form, is NaCl. In other words, the salt already HAS chlorine. Maybe the reason to use saltwater instead of normal water is that it stabilizes the chlorine levels in the surface of what you're cleaning?? Damnit, I can't remember now.

I have some reading to do and a science teacher to contact.
__________________
- Ken LePage
http://www.invictusart.com
http://www.invictusexotics.com
Invictus is offline  
Old 03-16-05, 04:33 PM   #15
Stockwell
Member
 
Join Date: Mar-2003
Location: Ontario Canada
Age: 64
Posts: 1,485
Wow....such over cautious soles some of you are..
I use old elm branches, just the way I find them.... I don't wash them, bleach them or treat them in any way at all. I don't do a damn thing to them... except cut them so they fit the cage. I've been doing this for years, and I have never had any problems. I might add that for over 15 years I kept about 300 breeding stock on Western bark that is Redwood and Sequoia nuggets, and that stuff is kept outside at garden centres and gets all kind of weird flies and stuff in it.... I never washed it either, as it would have been impracticle. And yes I got a few flies, which is more of a human annoyance than it is a worry to the animals welfare.
There are likely no detrimental pathogens on our dead forest stock that would effect the mostly tropical animals we keep....The chances of it are so low it makes trying to sanitize it a waste of time...
The same goes for bark and rocks...
I gather bark all the time for my Rosies. I like it better than plastic saucers because its long and alows better thermal regulation underneath, than a round hide.
Gathering bark gives the bride and I an excuse for exercise in the park. I never wash it. I have a thick paint brush I use simply to knock the dusty stuff off.. and I will occasionally use a dremel tool with cutting disc to chop it to size but I never clean it.
Gag, washing, baking, showering, bleaching.... who needs the extra work...
So I get the odd little centipede or pill bug in my trays...Its no big deal, they either find their way out or perish, certainly wont hurt the herps.
And PS
I don't really clean cages either . I use particulate substrates (Beta and Alpha chip)and spot clean by removing clumps of feces and sheds only. I generally replace all the substrate only once a year, after breeding season.
I use the deli container Hollister method for most of my water bowls. ie disposable. It's not exactly environmentally friendly, but it saves alot of time if you have a large collection.
I still use some Dollarama ramekin bowls for baby snakes... and I must say, washing them is a huge pain... I'll be looking to replace that method some small condiment cups this season, so they will be disposable as well... Simon and others with high numbers of small snakes are using this technique rather than bowls, simply as a time saver.
My years of spending all weekend cleaning cages, ornaments and water bowls are long gone, but I've been there.
__________________
Uncle Roy
-----------------------------------------
Herpetology - more than a hobby
It's a Lifestyle
celebrating 26 years of herp breeding
Stockwell is offline  
Login to remove ads
Closed Thread


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:07 PM.

Powered by vBulletin®
©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.

right