Pics of a Cage I am almost done

[Cornelsworld]

My second attempt at an oak cage: Almost Done.... It has taken me way too much of my spare time.. Can't wait to ship it off. Then I get to tackle the mess that I call a workshop.


<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1133.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1134.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1135.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1136.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1138.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1139.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1140.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1142.jpg">

<img src="http://www.cornelsworld.com/LargeImages/Michael/may29/DSCN1143.jpg">

The top Vent and the Electrical Hide box just need to be sanded and stained and then the cage is done.

Let me know what you think.

Greg:groove:

[Jeff_Favelle]

That's awesome, what's it for?

[Cornelsworld]

n/p

[stewart]

Very Lucky cornsakes!!!!!!!!

[Jeff_Favelle]

They are either 12 foot long cornsnakes that like to climb, or its going to be one crazy setup!!

[Quervo]

Nice lookin cage!

I like the little mouse holes in the back.

[Cornelsworld]

He wanted those in case he ever put heat pads or anything with a cord into the cage itself. I never even thought of them as mouse holes, but I guess if you ever fed live, it might be cause for some concern. His idea not mine. I thought everything turned out pretty good though.

Greg

[jason h]

very nice!! roughly whats it cost to build material etc. and why did you make the bottom glass? just curious.:thumbsup:

[Cornelsworld]

For me to build this cage including the labour (which i don't think I charged enough for was $1000.00. I used glass for everything except for the back and i'm sure that the glass is cheaper. I also thought that if he were to put heaters underneath, there would be better heat transfer. It is able to hole a fair bit of weight with the support that I have underneath it. I have stood inside it (200lbs) and had no problems.

Greg

[jason h]

cool thanks fer the answers it turned out wonderfully!

[backdraft1320]

SUPER NICE
LETS BUILD ONE FOR EVERYBODY LOL.