BP not using hot hide

[trailblazer295]

My prob for the UTH is inside the hot hide just below the substrate surface and reads 91f. Rancos have a digital screen.

[Albert Clark]

Originally Posted by trailblazer295

My prob for the UTH is inside the hot hide just below the substrate surface and reads 91f. Rancos have a digital screen.

Then your probe is in the wrong place for the optimal performance of the thermostat. The probe should be placed between the glass and the uth outside the enclosure. So, in fact the temps you are getting are incorrect and I bet its a lot hotter if you measure the temperature of the glass above the uth! Check and make sure your bp isn't suffering with belly burns. Be careful bc the uth can spike to over 130F - 160F Also the probe could be wet or obstructed from the substrate. Urine , water and defecation can alter your readings from probe to thermostat thus making the uth run unregulated.