border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Python Forums > General Python Forum

Notices

Closed Thread
 
Thread Tools Display Modes
Old 10-27-16, 11:02 AM   #1
Zulu3
Member
 
Join Date: Sep-2016
Posts: 5
Country:
Need a local Halifax, NS feeder supplier

I'm new to owning a ball python. He is a rescue and his tank came with me as if it had never been cleaned in its existence. I don't know much about maintaining his health (if he is even a he..?) and I've only fed him once. I was told he eats once a month, two mice but the more I've been trying to read it turns out he needs to eat a lot more. He seems to be a very good eater but I live in Halifax, Nova Scotia and I am having a really really hard time finding food for him.

So far I've cleaned out his cage, substrate, hides and branches, and waterdish. I've only been giving him bottled water (if that's what I'm suppose to be doing..) and his heat lamp before was just a light bulb. I've changed it now to be a nocturnal 75W bulb and so he is less in his hide now and seems to be always slightly in his new light. I hope thats a good sign. I have no idea what I need to do about humidity or temperature or feeding and cleaning. I don't know if his scales are nice or if he is acting like a normal snake. He is so sweet though and has an amazing temperament. Great cuddles and likes to watch tv with me. I don't know what I'm doing but I know I want to give him the best. He's really grown on me.
Zulu3 is offline  
Login to remove ads
Old 10-27-16, 11:23 AM   #2
aaron_cg
Member
 
aaron_cg's Avatar
 
Join Date: Sep-2012
Location: The Woodlands
Posts: 502
Country:
Re: Need a local Halifax, NS feeder supplier

Few things.

Switch to a Under Tank Heater for BP's. This should be attached to a good thermostat like a Herpstat. Those are costly, but worth it.

Next step would be to change to something better than a glass aquarium. They can work for BPs, but require modification's to help hold humidity as well as heat. Personally since you only have one, just a normal plastic tub would work like this one

Substrate wither use the cocoa fiber from pet stores, or use 100% pure cypress mulch. I preferred the cypress, but needs to be 100% cypress. Not a blend.

As far as furnishings, atleast 2 hides, one above the heat source and one on the cool side. 1 water bowl and thats all you need. More isn't bad, but not needed.

Hot side should be no hotter than about 95F, no cooler than around 87F. I kept mine at 91F. Humidity 55% or so, which is easy to do in the plastic tubs.

BP's are almost always hiding. Its normal behavior. They are also nocturnal.

As far as the feeding goes, it would depend on the size. If you have a kitchen scale, get the weigh in grams and update us. As well as a picture would be helpful.

For feeding sources, the way I found mine was through Facebook groups in my area. May check that out. Google lead me to The Brass Gecko To find more just search "feeder rodents" and add in your city or others near you.
__________________
Keep Low. Move Fast. Kill First. Die Last. One Shot. One Kill. - Educated keeper forever evolving.
aaron_cg is offline  
Old 10-27-16, 01:12 PM   #3
Zulu3
Member
 
Join Date: Sep-2016
Posts: 5
Country:
Re: Need a local Halifax, NS feeder supplier

OKay thanks so much! I already have a glass terrarium though.. is there anything I should do to improve it? I'll take some pictures and update
Zulu3 is offline  
Old 10-27-16, 01:34 PM   #4
aaron_cg
Member
 
aaron_cg's Avatar
 
Join Date: Sep-2012
Location: The Woodlands
Posts: 502
Country:
Re: Need a local Halifax, NS feeder supplier

Local hardware stores (Home Depot) typically have foam sheets. Covering the bottom, and sides (from the outside) with 1/2 foam will help it feel more secure. You can use aquarium wraps to make it look more decorative, again put those on the outside of the glass.

Using aluminum tape, cover 70% of the screen on top so it will help keep in humidity, or even better, get thin sheet of acrylic on top.

I would still switch to a UTH though. Belly heat works better for BP's.

I would also stay away from the Aspen as substrate. Tends to mold easily.
__________________
Keep Low. Move Fast. Kill First. Die Last. One Shot. One Kill. - Educated keeper forever evolving.
aaron_cg is offline  
Old 10-27-16, 01:39 PM   #5
aaron_cg
Member
 
aaron_cg's Avatar
 
Join Date: Sep-2012
Location: The Woodlands
Posts: 502
Country:
Re: Need a local Halifax, NS feeder supplier

Here, this pic helps show what I am talking about.

Ignore the aspen, this was before I knew better.

__________________
Keep Low. Move Fast. Kill First. Die Last. One Shot. One Kill. - Educated keeper forever evolving.
aaron_cg is offline  
Login to remove ads
Closed Thread

Tags
ball python, feeders, halifax, new owner, rescue


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 10:16 AM.

Powered by vBulletin®
©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.

right