border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Community Forums > General Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 06-14-13, 04:31 PM   #1
ErikBush97
Banned
 
Join Date: Apr-2013
Location: Milwaukie, Oregon
Age: 27
Posts: 1,398
Country:
Tub Problems...

Hello, everyone. I recently switched my Ball to a Tub, from a Terrarium. Everything is working great, except for the humidity... It is staying at about 50-60% humidity which is perfect but it is also making the enclosure extremely damp/wet. Can't a Damp/wet enclosure cause skin infections and other problems as well? I switched out the wet bedding and replaced it with dry bedding, and I dried all the hides, walls, and lid of the enclosure about an hour ago, but that's besides the point. I switched to a tub to eliminate the need to mist every couple of hours. I'd much rather mist every couple hours, than change bedding every couple of hours. Anyways, Please leave suggestions as to How I'd get rid of some of that wetness/dampness or if that's fine for a Ball Python, and I shouldn't worry about it.

P.S. The reason I say "wetness/dampness" is because it's too wet to call it damp, and it's too damp to call it wet.
ErikBush97 is offline  
Login to remove ads
Old 06-14-13, 05:04 PM   #2
Lankyrob
Non Carborundum Illegitimi
 
Lankyrob's Avatar
 
Join Date: Mar-2010
Location: Keynsham
Age: 49
Posts: 9,556
Country:
Re: Tub Problems...

Constant wetness isnt a good thing, you want humidity in the air not wetness on the floor, havent ever used tubs tho so will let someone else advise how to help.
__________________
May you have more good days than bad
You never know how strong you are - until being strong is your only choice
There are no dark clouds - just well hidden silver linings!!
Lankyrob is offline  
Old 06-14-13, 05:07 PM   #3
Amadeus
Banned
 
Join Date: Jun-2013
Location: Bucks County, PA
Posts: 974
Country:
Re: Tub Problems...

I have my current BCI in a tub and if you put more holes into the lid and sides it will help more water to evaporate, be careful not to put too many though.
Amadeus is offline  
Old 06-14-13, 05:14 PM   #4
ErikBush97
Banned
 
Join Date: Apr-2013
Location: Milwaukie, Oregon
Age: 27
Posts: 1,398
Country:
Re: Tub Problems...

Quote:
Originally Posted by Amadeus View Post
I have my current BCI in a tub and if you put more holes into the lid and sides it will help more water to evaporate, be careful not to put too many though.
Thanks Here's the ventilation system I have.
I will go buy like.. 3 - 4 small ones (they're like the size of a quarter) and put them on the side of the tub.
Attached Images
File Type: jpg IMG_20130613_213048.jpg (24.0 KB, 65 views)
ErikBush97 is offline  
Old 06-14-13, 05:21 PM   #5
Mikoh4792
Member
 
Mikoh4792's Avatar
 
Join Date: May-2013
Posts: 4,858
Country:
Re: Tub Problems...

How do you know the humidity is 50-60%? I bet you it isn't with the inside of the tub being damp/wet. It's probably more like 70-90%. If you are still using those gauges to read the humidity levels than it's most likely wrong.

I have just started using rack systems and I made a thread earlier about the humidity being too high. I just kept adding rows of small holes until they started to hold 50-70% consistently instead of 70-90%. Whenever I put my hand inside the tub I could feel that the air was too wet, and there was condensation inside the walls of the hiding spots and around the water bowl. Trial and error will work for you if you keep putting holes into the tub a little at a time.
Mikoh4792 is offline  
Login to remove ads
Old 06-14-13, 05:21 PM   #6
Amadeus
Banned
 
Join Date: Jun-2013
Location: Bucks County, PA
Posts: 974
Country:
Re: Tub Problems...

Quote:
Originally Posted by ErikBush97 View Post
Thanks Here's the ventilation system I have.
I will go buy like.. 3 - 4 small ones (they're like the size of a quarter) and put them on the side of the tub.
NP man, and what are you using as a screen there? I'm just interested as I never thought of that =]
Amadeus is offline  
Old 06-14-13, 06:56 PM   #7
Terranaut
Morelia Enjoyus Maximus
 
Terranaut's Avatar
 
Join Date: Oct-2011
Location: Kitchener
Age: 54
Posts: 4,615
Country:
Re: Tub Problems...

It's a sink drain catch.
I think your just used to the old setup you had drying out in a couple hours. If it is wet a day or so it's fine. Wet for a couple weeks is not. When you mist now with a tub you don't need to drench it down. Just a light mist will do. Wait a week and let us know. Also your humidity sounds wrong to have wetness in the tub. Where is the probe located?
__________________
0.1 BCI 1.1.2 Jungle Carpet Pythons 1.0 Jungle Jag 1.0 Goins King Snake 0.1 Leopard Gecko 0.1 Albino Gopher Snake 1.0 Pastel Ball Python
Terranaut is offline  
Old 06-14-13, 07:50 PM   #8
bigsnakegirl785
Member
 
bigsnakegirl785's Avatar
 
Join Date: Aug-2011
Location: Waynesville
Age: 30
Posts: 3,879
Country:
Re: Tub Problems...

I don't mist my tubs, since I was having the same issue as you. Instead, I pour water into the bedding and mix it up. Of course, that might not work for you, it could depend on the bedding.
__________________
3.3 BI Cloud, sunglow Nymeria, ghost Tirel, anery motley Crona, ghost Howl, jungle Dominika - 0.1 retic Riverrun - RIP (Guin, Morzan, Sanji, and Homura - BRBs, Bud - bp, Draco and Demigod - garters)
bigsnakegirl785 is offline  
Old 06-14-13, 07:53 PM   #9
smy_749
Member
 
smy_749's Avatar
 
Join Date: Mar-2013
Location: CT
Posts: 3,888
Country:
Re: Tub Problems...

Quote:
Originally Posted by mikoh4792 View Post
How do you know the humidity is 50-60%? I bet you it isn't with the inside of the tub being damp/wet. It's probably more like 70-90%. If you are still using those gauges to read the humidity levels than it's most likely wrong.

I have just started using rack systems and I made a thread earlier about the humidity being too high. I just kept adding rows of small holes until they started to hold 50-70% consistently instead of 70-90%. Whenever I put my hand inside the tub I could feel that the air was too wet, and there was condensation inside the walls of the hiding spots and around the water bowl. Trial and error will work for you if you keep putting holes into the tub a little at a time.
Humidity is the % of water vapor in the air. A wet enclosure is not a humid one. I have humid enclosures with no condensation or wet spots in them. Also, warmer air is easier to keep humid than cold air. (thats why you see condensation on cold glasses etc.)

Just put a water bowl, don't mist at all, and check the humidity after a bit.
smy_749 is offline  
Old 06-14-13, 08:23 PM   #10
Mikoh4792
Member
 
Mikoh4792's Avatar
 
Join Date: May-2013
Posts: 4,858
Country:
Re: Tub Problems...

Quote:
Originally Posted by smy_749 View Post
Humidity is the % of water vapor in the air. A wet enclosure is not a humid one. I have humid enclosures with no condensation or wet spots in them. Also, warmer air is easier to keep humid than cold air. (thats why you see condensation on cold glasses etc.)

Just put a water bowl, don't mist at all, and check the humidity after a bit.
You are telling me things I already know. I have already pointed that fact out to other members here. However, speaking from experience a damp/wet tub is a humid tub. Tubs are usually short in height and the humidity inside a damp/wet tub will be drastically higher than the humidity in a damp/wet enclosure/tank. With that quarter sized hole as his only ventilation in his tub, a damp/wet environment will not keep his enclosure at 50-60%, it will be much higher.

Edit: I don't understand why you mentioned it being easier to keep humidity in warmer air than in colder air. It doesn't further your argument. Snake tubs/enclosures will be warm, therefore more humidity. You combine warm air, water bowl, damp/wet environment and you have a very humid enclosure. A little too humid for his type of snake, and most likely more humid than his analog humidity/thermometers are reading.

Last edited by Mikoh4792; 06-14-13 at 08:30 PM..
Mikoh4792 is offline  
Login to remove ads
Old 06-14-13, 08:27 PM   #11
smy_749
Member
 
smy_749's Avatar
 
Join Date: Mar-2013
Location: CT
Posts: 3,888
Country:
Re: Tub Problems...

ok sorry :P my eyes hurt and I haven't been following all the responses. Time for bed.....
smy_749 is offline  
Old 06-14-13, 08:42 PM   #12
ErikBush97
Banned
 
Join Date: Apr-2013
Location: Milwaukie, Oregon
Age: 27
Posts: 1,398
Country:
Re: Tub Problems...

Quote:
Originally Posted by mikoh4792 View Post
How do you know the humidity is 50-60%? I bet you it isn't with the inside of the tub being damp/wet. It's probably more like 70-90%. If you are still using those gauges to read the humidity levels than it's most likely wrong.

I have just started using rack systems and I made a thread earlier about the humidity being too high. I just kept adding rows of small holes until they started to hold 50-70% consistently instead of 70-90%. Whenever I put my hand inside the tub I could feel that the air was too wet, and there was condensation inside the walls of the hiding spots and around the water bowl. Trial and error will work for you if you keep putting holes into the tub a little at a time.
Thanks for the suggestion! I am still using those gauges Haven't had time to pick a better one up. Do you have a link for a good one? Maybe on Amizon or Ebay?
ErikBush97 is offline  
Old 06-14-13, 08:43 PM   #13
ErikBush97
Banned
 
Join Date: Apr-2013
Location: Milwaukie, Oregon
Age: 27
Posts: 1,398
Country:
Re: Tub Problems...

Quote:
Originally Posted by Amadeus View Post
NP man, and what are you using as a screen there? I'm just interested as I never thought of that =]
It's a little sink/bath tub drain cover thing. Got it for $1 at Big Lots.
ErikBush97 is offline  
Old 06-14-13, 08:48 PM   #14
ErikBush97
Banned
 
Join Date: Apr-2013
Location: Milwaukie, Oregon
Age: 27
Posts: 1,398
Country:
Re: Tub Problems...

Quote:
Originally Posted by Terranaut View Post
It's a sink drain catch.
I think your just used to the old setup you had drying out in a couple hours. If it is wet a day or so it's fine. Wet for a couple weeks is not. When you mist now with a tub you don't need to drench it down. Just a light mist will do. Wait a week and let us know. Also your humidity sounds wrong to have wetness in the tub. Where is the probe located?
It's located in the middle-ish of the tub. about an inch or so toward the hot side of the tub. And one quick question... If those tubs get hot, won't the produce dangerous fumes? Idk what "too hot" would be for those tubs, but the hot side of the tub is at 92 degrees. That was one reason I was kind of skeptical of tubs but I forgot to ask about that.
ErikBush97 is offline  
Old 06-14-13, 08:49 PM   #15
ErikBush97
Banned
 
Join Date: Apr-2013
Location: Milwaukie, Oregon
Age: 27
Posts: 1,398
Country:
Re: Tub Problems...

Quote:
Originally Posted by bigsnakegirl785 View Post
I don't mist my tubs, since I was having the same issue as you. Instead, I pour water into the bedding and mix it up. Of course, that might not work for you, it could depend on the bedding.
I'm using Paper Towels :/
ErikBush97 is offline  
Login to remove ads
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:25 AM.

Powered by vBulletin®
©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.

right