| |
Notices |
Welcome to the sSnakeSs community. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us.
|
02-14-15, 12:26 AM
|
#1
|
Member
Join Date: Jan-2015
Location: Canada
Posts: 134
Country:
|
Question on Ceramic Hea Emitters
Ok so as most of you know I'm trying to decide on decent priced way to heat my renevated wood vivarium for my corn snake. I've played with the idea of heat cable (just about ruled that out), heat panels (to expensive) and now I'm thinking of the CHE.
So here is my questions on the CHE:
1. Can these "Heaters" sit on a screen or do they have to be suspended above the cage?
2. If my viv is approximately a 65 gal what wattage would I need to heat 1/4-1/2 of it?
3. For those of you that use/have used these do you leave them on 24/7 or do you turn them off at night? Is it safe for the corn to not have heat all night?
Thanks!
|
|
|
02-14-15, 01:06 AM
|
#2
|
Member
Join Date: Jan-2015
Location: Canada
Posts: 134
Country:
|
Re: Question on Ceramic Hea Emitters
Oh and question 4. Do you use thermostats with CHE's?
|
|
|
02-14-15, 02:23 AM
|
#3
|
Forum Moderator
Join Date: Dec-2014
Location: middle tn
Posts: 4,269
Country:
|
Re: Question on Ceramic Hea Emitters
I can only answer the 1st question.
I wouldn't set it directly on the screen, but uf you have it in a dome, you can set the dome on the screen. Still not advised imo because if the snake rubs the screen for some reason, could burn the snake.
__________________
"THE Reptiholic"
I stopped counting at 30....
|
|
|
02-14-15, 03:22 AM
|
#4
|
Member
Join Date: Sep-2014
Posts: 1,252
Country:
|
Re: Question on Ceramic Hea Emitters
I've been using them for several different tanks, but not for my Okeetee corn snake. I have him/her in a small tank with a small reptitherm UTH on one end. It's only 4 watts, so a t-stat isn't necessary to control it, and the corn has been growing and generally thriving quite well.
I use 100w CHE's for my small DRMB's and 150w for the carpet python and red tail boas. I turn off the heaters on the DRMB's at night, but leave the others on all the time.
I don't allow the ceramic to touch the screen tops directly, though they are quite close. No domes, they'd likely trap too much rising heat, so I made my own fixtures to hold the bulbs. I don't use t-stats on them, simply set them up higher to decrease the heat a bit.
__________________
7.6.26 Dominican red mountain boas, 1.1 carpet pythons, 3 ATB, 1.1 climacophora, 1.1 Russian rats, 1.1 prasina, 1.1 speckled kings, 3.3.1 corns, 1.1.1 black rats, 1.1 savu, 1.1 Stimson's, 1 spotted python, 1.1 Boiga nigriceps, 3 Olive house snakes, 1 Sonoran mountain king, 0.1 Sinoloan milk snake, 1.1 Dione rat snake.
|
|
|
02-14-15, 12:37 PM
|
#5
|
Member
Join Date: Sep-2013
Posts: 201
Country:
|
Re: Question on Ceramic Hea Emitters
I use them, and put them in a dome, like you would a light bulb, then i set that on a screen, if the cage requires it.
I like to buy a strong wattage, like 100 watt, and use a thermostat, that way, your CHE isn't struggling and running all the time to heat your enclosure. I use a cheaper model thermostat, Hydrofarm, ebay has them for around $35. I leave mine run 24 hours a day like this. Temps are really easy to control once you dial in your thermostat.
__________________
1.0 Bredli, 1.0 Jungle Zebra, 1.0 Coastal Jag, 0.1 Jungle Jag, 0.1 Dumeril's Boa, 0.1 Burmese Python, 0.1 BCI
|
|
|
02-15-15, 10:09 AM
|
#6
|
Member
Join Date: Dec-2013
Location: Akron, Ohio
Posts: 1,055
Country:
|
Re: Question on Ceramic Hea Emitters
I would always use a thermostat with a Che. They get unbelievably hot. Like 500+. I've had them melt the wires just from the residual heat coming back up through an enclosure. Just for the sake of safety(fire hazard), you should use something to control the temp.
__________________
"I refuse to engage in a battle of wits with an unarmed person"
|
|
|
02-15-15, 04:19 PM
|
#7
|
Member
Join Date: Jan-2015
Location: Canada
Posts: 134
Country:
|
Re: Question on Ceramic Hea Emitters
Thanks! That's all my questions answered!
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 08:39 AM.
Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.
|
|