Zoo Med

[desipooh.12]

Originally Posted by slowhite03

Sorry you got all the thermostat nazis on you but getting back to your original question, you may of just had a bad heat mat. If you have your receipt, I'm pretty sure there is a year warranty on those. Or you buy a new one from petsmart and return the old one. Just a few suggestions

yes thank you lol
I think its just me!

[desipooh.12]

Originally Posted by Terranaut

I just skimmed the thread so if I repeat anyone..sorry.
First off a cheap thermostat is better than none so please get one $25 will buy you what you need. I have one of those heat mats and wide open without control will get very hot. I have not tested it but I would gueas well over 100º. Typically the pulse propotional thermostats are higher quality but wether or not a perfect temp is better for your snake is just not true. Nature doesn't hold a perfect temp nor does your snake hold a perfect temp. If this was the case you could set it and never have your snake move. If the snake can find the perfect temp in it's enclosure you have controlled enough. I hate it when people say the pulse are better for your snake. This simply isn't true. Higher quality is better but tighter temp control is not required. Actually it can cause your snake to just sit there with little effort to thermoregulate. Or in other words....no excersise.

Mm no its no where near 100,
yes I need to get one,
but I just bought a thermometer & I think it maybe a little off or getting there because the humidity is rising.. I was just wondering or maybe its just me not being patient..
but thank you! I have found one on amazon for like $32..

[Terranaut]

Originally Posted by desipooh.12

Mm no its no where near 100,
yes I need to get one,
but I just bought a thermometer & I think it maybe a little off or getting there because the humidity is rising.. I was just wondering or maybe its just me not being patient..
but thank you! I have found one on amazon for like $32..

Good luck with it.I hope you get it sorted out.

[desipooh.12]

Originally Posted by Terranaut

Good luck with it.I hope you get it sorted out.

thank you!
I have another question,
so the thermostat only has one outlet
& what if you plan to have multiple species?
I've seen thermostats with 2 plugs
but if I have multiple snakes id have to get one for each one? Correct?

[Mikoh4792]

Originally Posted by desipooh.12

thank you!
I have another question,
so the thermostat only has one outlet
& what if you plan to have multiple species?
I've seen thermostats with 2 plugs
but if I have multiple snakes id have to get one for each one? Correct?

If you plan to keep multiple species and use only one probe, I'd suggest using only one heat source. For example a single strip of flexxwat or anything for that matter for multiple enclosures( Ie. a rack system)

If you are going to be using multiple heat sources to heat multiple enclosures I would use a probe for each of them, meaning you may have to buy more than one thermostat. You can buy thermostats that have up to 2-4 probes(herpstat, vivarium electronics..etc) which you can then use to heat 2-4 enclosures.

[Terranaut]

Originally Posted by Mikoh4792

If you plan to keep multiple species and use only one probe, I'd suggest using only one heat source. For example a single strip of flexxwat or anything for that matter for multiple enclosures( Ie. a rack system)

If you are going to be using multiple heat sources to heat multiple enclosures I would use a probe for each of them, meaning you may have to buy more than one thermostat. You can buy thermostats that have up to 2-4 probes(herpstat, vivarium electronics..etc) which you can then use to heat 2-4 enclosures.

This....
Or just get another hydrafarm for a second heat source.
I have all of my enclosures on seperate thermostats. If you need to seperate the enclosures for any reason it isn't a big deal to sort out.

[desipooh.12]

Thank you all I appreciate the advice, with out being
Criticized!
I plan to make my own rack system, I've YouTube it
& it seems fairly easy!
I just need more space..

[Kid Boa]

I use Sterilite tubs for all my Boas, they are GREAT for holding humidity.

I use a combination of Eco-Earth and Cyprus Mulch for substrate. I have one Zoom Med UTH on a thermostat to maintain a 82-85 hot spot and a 74-76 cool side. Humidity is always 90%+

I have used Zoom Med UTHs for years with no issues at all. You may have gotten a bad matt.

Hope this helps.

[desipooh.12]

Originally Posted by Kid Boa

I use Sterilite tubs for all my Boas, they are GREAT for holding humidity.

I use a combination of Eco-Earth and Cyprus Mulch for substrate. I have one Zoom Med UTH on a thermostat to maintain a 82-85 hot spot and a 74-76 cool side. Humidity is always 90%+

I have used Zoom Med UTHs for years with no issues at all. You may have gotten a bad matt.

Hope this helps.

that is how I have my enclosure..
I've already fixed the problem..
thank you tho

[Aaron_S]

Originally Posted by desipooh.12

thank you!
I have another question,
so the thermostat only has one outlet
& what if you plan to have multiple species?
I've seen thermostats with 2 plugs
but if I have multiple snakes id have to get one for each one? Correct?

Depends on the species.

I keep purely ball pythons now and I use herpstats. I can control four racks with one of them. Each probe can be set individually so I can use different species if I wanted to.

Personally, Dion over at spyder robotics (who makes herpstats) is so good with customer service I will never use another product. It's a little on the high end but well worth it.

I have his newer stuff and not only can I set temps and night drops but the last two outlets can either be used for heating elements OR I can use them with bulbs and make a sunrise and sunset!

[desipooh.12]

Originally Posted by Aaron_S

Depends on the species.

I keep purely ball pythons now and I use herpstats. I can control four racks with one of them. Each probe can be set individually so I can use different species if I wanted to.

Personally, Dion over at spyder robotics (who makes herpstats) is so good with customer service I will never use another product. It's a little on the high end but well worth it.

I have his newer stuff and not only can I set temps and night drops but the last two outlets can either be used for heating elements OR I can use them with bulbs and make a sunrise and sunset!

oh wow! Do they have a website?

[desipooh.12]

Originally Posted by Aaron_S

Depends on the species.

I keep purely ball pythons now and I use herpstats. I can control four racks with one of them. Each probe can be set individually so I can use different species if I wanted to.

Personally, Dion over at spyder robotics (who makes herpstats) is so good with customer service I will never use another product. It's a little on the high end but well worth it.

I have his newer stuff and not only can I set temps and night drops but the last two outlets can either be used for heating elements OR I can use them with bulbs and make a sunrise and sunset!

well I have my BRB & I'm going to be getting ball pythons soon.. I know the temps are different.. I just need to get everything setup
& so on & so forth..

[Mikoh4792]

Originally Posted by desipooh.12

oh wow! Do they have a website?

Yes but they are expensive if you are going to buy one that heats 2 or 4 heat sources(around $200-$300)

I too use only herpstats. They've been great with all the options they give.

Spyder Robotics

[Aaron_S]

Originally Posted by Mikoh4792

Yes but they are expensive if you are going to buy one that heats 2 or 4 heat sources(around $200-$300)

I too use only herpstats. They've been great with all the options they give.

Spyder Robotics

Well worth the expense in my eyes to keep everything you hold dear alive.

[Mikoh4792]

Originally Posted by Aaron_S

Well worth the expense in my eyes to keep everything you hold dear alive.

Right, when it comes to the safety of your animals paying the extra dollar is always worth it.