border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Enclosure Creation Forums > General Enclosure Discussion

Notices

Closed Thread
 
Thread Tools Display Modes
Old 05-16-02, 09:29 PM   #1
snake_girl
Member
 
Join Date: Mar-2002
Location: Ontario, Canada
Age: 39
Posts: 148
Send a message via MSN to snake_girl
Question good or bad???

Not sure how to describe this but here goes.

The guy that was suppose to build my in closer for me got hurt, so I have a new guy and he pitched this idea to me an I’m not sure about it. It’s an Idea for a common red tail boa tank.

He said it would be easier if I take a door, and build an in closer around the door that way it will fit in my house, and will be easier to clean, and I’m not sure if I like that idea, what do you guys think…. Good? Bad?

Should I just stick to a simple wooden in closer???

Thanks a bunch
Grace :w
__________________
~life is like a big toilet and guess what your in it!~
snake_girl is offline  
Login to remove ads
Old 05-16-02, 10:49 PM   #2
Grant vg
Member
 
Join Date: Feb-2002
Location: Toronto, Canada
Age: 43
Posts: 1,360
Send a message via AIM to Grant vg
What do u mean.....build an enclosure using an actual door?????
Or using the measurements of a doorway to figure out measurments for an enclosure.....
BTW ur post sounds.....it sounds like he wants to use the door.....sounds kinda unneccessary....and doors are heavy....also,...u cant see through most doors.....try to explain it better.......
__________________
Grant van Gameren
Grant vg is offline  
Old 05-17-02, 07:58 AM   #3
snake_girl
Member
 
Join Date: Mar-2002
Location: Ontario, Canada
Age: 39
Posts: 148
Send a message via MSN to snake_girl
lol

yep he means around a door, so that the side of the incloser will be a Door! so that if I need to get in I'd go threw the door.

here is what he said: there would be a veiwing area like a big glass window and then the other sides would be the door and wood. I hope that helps.

I thought it sounded silly the door he wants to use is pretty light, so weight isn't a concer its the fact that I'd be using a door

thanks

Grace
__________________
~life is like a big toilet and guess what your in it!~
snake_girl is offline  
Old 05-17-02, 10:20 AM   #4
jason h
Member
 
jason h's Avatar
 
Join Date: Feb-2002
Location: southern ontario
Posts: 750
how long and tall deep is it to be ? it sounds like he wants to build a walk-in but the part that confuses me is you said so you can get it in the house there fore it would have to be smaller than a door to fit in?
jason h is offline  
Old 05-20-02, 11:43 PM   #5
Richard Welter
Member
 
Richard Welter's Avatar
 
Join Date: May-2002
Location: Canada
Age: 42
Posts: 394
Caging for a common boa

This is what I would and have done. I would build a 6x3x3 wood box cage and have a door with metal mesh, followed by a piano hing. and three L locks on it. The best part of this cage is you need it to have high humidity so what I did was put arboright (spelling) in the whole cage and put it on every part of wood. This makes it so the wood does not break down. Then use cocking and seal the whole tank. Looks very nice and is good for you snake. Like the cage on the right but about fours times the size and have to door on top. (hedgehog cgae for me) I hope I help Richard Welter
Attached Images
File Type: jpg jeune-femell03.jpg (128.6 KB, 82 views)
Richard Welter is offline  
Login to remove ads
Old 05-21-02, 12:44 AM   #6
marisa
Member
 
Join Date: Mar-2002
Posts: 5,936
Send a message via ICQ to marisa Send a message via MSN to marisa Send a message via Yahoo to marisa
hi

I think that sounds silly, personally. No offense.

If the enclosure is the same size as your door, using a door, it won't fit in your house at all. Unless it's SMALLER than your door.

Or in pieces.

And using a door just sounds was too weird when so many other much lighter, more economical materials are available. Doors are heavy, even cheap doors. It just doesn't seem logical to me.

I'd turn down the idea. Everyone who replied has good thoughts, just pick something else. I would definitly.

marisa

P.S. I can see using a door in a LARGE cage, but something lighter like a homemade door/ screen door, plexi glass door- etc. I just can't see a actually Front house door being convienent.
marisa is offline  
Old 05-21-02, 08:57 AM   #7
snake_girl
Member
 
Join Date: Mar-2002
Location: Ontario, Canada
Age: 39
Posts: 148
Send a message via MSN to snake_girl
Thanks for all your help guys!!!

heres a little more info, I talked to the guy and asked him if he would show me what he means because he said he's done it before, so I went over to his house and saw the Incloser. This thing was pretty long about 6ft and the door was like the ones you see in a shed(you know the wooden shed doors)

its looked to me to be about 6ft long 5ft high and 3ft wide.(not sure it thats right)

on the side was the door it was three feet and then, the back was wood, and the other side was wood also. the front was a frame of wood and then a window(plate of glass)

the weight of it is heavy its like a small room but he got some extra streagth wheels for the hosptial and even I can push it.

It looks really nice and he has a 8ft Boa in there that couldn't be more happy. but I told him I still wasn't sure.

we'd beable to get it in my apt if we turned it side ways, but this thing is big! does any of my discription draw a picture for you because I don't have one
__________________
~life is like a big toilet and guess what your in it!~
snake_girl is offline  
Old 05-21-02, 10:02 AM   #8
Grant vg
Member
 
Join Date: Feb-2002
Location: Toronto, Canada
Age: 43
Posts: 1,360
Send a message via AIM to Grant vg
Why dont u just get him to build u one like the ones i built in the pictures below in a previous thread....they're extremely easy to build and and stackable.....
The glass looks much better then a door or somethin....plus 6x5x3 is way to big then neccessary.....6x2x2 is good enough for any size boa u could even make the depth 3 feet if u wanted....but i see no need to make something around a door....

Wouldn't u agree that u would like opening an enclosure by sliding glass???

Personnally, i think there are many better ways to go about building an enclosure then what this guy has proposed....just my 2 cents...
__________________
Grant van Gameren
Grant vg is offline  
Old 05-21-02, 10:36 AM   #9
snake_girl
Member
 
Join Date: Mar-2002
Location: Ontario, Canada
Age: 39
Posts: 148
Send a message via MSN to snake_girl
your right! I had the idea you just said ready to go with the other guy, I'm just going to tell him to forget the door thing and just make one with sliding glass

Thanks
Grace
__________________
~life is like a big toilet and guess what your in it!~
snake_girl is offline  
Old 05-21-02, 03:45 PM   #10
Linds
Former Moderator no longer active
 
Join Date: Feb-2002
Location: Christchurch
Posts: 10,251
Country:
IMO wire mesh on a snake cage isnt a great idea. Often a snake in that type of enclosure will end up with nose rub

I agree with Grant, go with his cage design. It simple, attractive, and functional
Linds is offline  
Login to remove ads
Old 05-21-02, 10:40 PM   #11
marisa
Member
 
Join Date: Mar-2002
Posts: 5,936
Send a message via ICQ to marisa Send a message via MSN to marisa Send a message via Yahoo to marisa
I agree with

Linds. I don't think wire is a good choice for snakes.

marisa
marisa is offline  
Closed Thread


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 08:41 PM.

Powered by vBulletin®
©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.

right