|
|  |
| Notices |
Welcome to the sSnakeSs community. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us.
|
08-02-04, 11:08 PM
|
#1
|
|
Member
Join Date: Jul-2004
Location: Houston, Texas - I love it!
Posts: 31
|
Humidity issue, suggestions?
I am having an issue with humidity.
I have an UTH and bowl of water and the humidity stays right at about 60%.
Once I turn on my 45 watt light the humidity goes down to 55%
I can't take the heat lamp away because without it the temp is below 80 degrees and thats during the day.
The heat lamp seems to be drying out the enclosure.
I am not sure if she is going to shed soon but just in case I want her environment to be perfect.
An suggestions on how to keep the humidity up with the heat lamp?
|
|
|
|
08-02-04, 11:24 PM
|
#2
|
|
Former Moderator no longer active
Join Date: Feb-2002
Location: Christchurch
Posts: 10,251
Country: 
|
Firstly, how are you measuring your temps? You should be measuring the surfaces within the enclosure, using a temp gun or digital thermometer (with probe). Unless your home is quite cool, the uth should be adequate enough. If you are using a stick-on thermometer it isn't measuring the temps your snake accesses, onlt the air temp surrounding it. That asides...
55% should be fine for your ball. I keep mine at about 50% for most of the year and they do well.
|
|
|
|
|
08-02-04, 11:28 PM
|
#3
|
|
Member
Join Date: Aug-2004
Location: Long island, New York
Age: 35
Posts: 2
|
i dunno if this would work with a snake but my friend mists his iguana cage to keep the humidity up....i dunno if it would work for the amount of humidity for a ball but i guess it wouldnt hurt to try rite?
|
|
|
|
|
08-02-04, 11:28 PM
|
#4
|
|
Member
Join Date: Jul-2004
Location: Houston, Texas - I love it!
Posts: 31
|
Quote:
Originally posted by Linds
Firstly, how are you measuring your temps? You should be measuring the surfaces within the enclosure, using a temp gun or digital thermometer (with probe). Unless your home is quite cool, the uth should be adequate enough. If you are using a stick-on thermometer it isn't measuring the temps your snake accesses, onlt the air temp surrounding it. That asides...
55% should be fine for your ball. I keep mine at about 50% for most of the year and they do well.
|
I am using stick on gauges. One for temp and one for humidity. Yeah my home stays cool. I guess I should go buy a digital thermometer, huh?
|
|
|
|
|
08-03-04, 01:32 AM
|
#5
|
|
Member
Join Date: Jan-2004
Location: Fargo, ND
Age: 43
Posts: 579
|
yep
Also, is it in a screen top aquarium?
__________________
Brent Strande
0.1 Corn Snake (Anery), 1.1 JCP (High Yellow), 1.1 BRB, 1.0 Albino BCI, 0.1 Het Albino BCI, 1.0 GTP (Jayapura type)
www.freewebs.com/brentstrande
|
|
|
|
|
08-03-04, 11:03 AM
|
#6
|
|
Member
Join Date: Oct-2003
Location: Indianapolis, Indiana
Posts: 560
|
If it's a screen top you can cover with damp towels. I highly recommend a digital w/ probes. The stickon kinds are generally crap - unreliable and don't measure belly/surface temps.
__________________
1.0 Ball Python "Aragorn", 1.0 Bredl's Carpet Python "Strider"
1.0 Kenyan Sand Boa "Gimli", 1.0 Saharan Sand Boa "Frodo"
1.0 Mexican Black King "Indigo", 0.1 California King "Gentoo", 1.0 Snow Corn "Chile", 0.1 Okeetee Corn "Amazon"
1.0 Crested Gecko "Willow", 0.1 IJ Blue-Tongued Skink "Phoebe", 1.0 Indonesian Blue-Tongued Skink "Cole"
|
|
|
|
|
08-03-04, 12:03 PM
|
#7
|
|
Member
Join Date: Jul-2002
Location: Edmonton, Alberta
Age: 48
Posts: 1,850
|
Quote:
Originally posted by Karma
I am using stick on gauges. One for temp and one for humidity. Yeah my home stays cool. I guess I should go buy a digital thermometer, huh?
|
Where is it stuck on? If it is stuck to the side of the tank...then the bottom, where the UTH is...is probably way too hot.
You have to measure the temperature right where the snake is...right on the floor of the enclosure.
__________________
If there is anything the nonconformist hates worse than a conformist, it's another nonconformist who doesn't conform to the prevailing standard of nonconformity.
|
|
|
|
|
08-03-04, 01:21 PM
|
#8
|
|
Banned
Join Date: Jun-2004
Location: Manitoba
Age: 34
Posts: 637
Country: 
|
What is your substrate?
Bark mulch will keeep up the humidity nicely 
|
|
|
|
|
08-03-04, 01:49 PM
|
#9
|
|
Member
Join Date: Jul-2004
Location: Houston, Texas - I love it!
Posts: 31
|
Quote:
Originally posted by jjnnbns
yep
Also, is it in a screen top aquarium?
|
I am using a Sterelite container. I have drilled holes in the lid and some on the sides.
|
|
|
|
|
08-03-04, 01:52 PM
|
#10
|
|
Member
Join Date: Jul-2004
Location: Houston, Texas - I love it!
Posts: 31
|
Quote:
Originally posted by Big Mike
Where is it stuck on? If it is stuck to the side of the tank...then the bottom, where the UTH is...is probably way too hot.
You have to measure the temperature right where the snake is...right on the floor of the enclosure.
|
They are stuck on the side near the top.
It is on the side where the UTH is but not at the bottom where the UTH is.
What are you saying is way too hot, the heater or the temp?
|
|
|
|
|
08-03-04, 01:54 PM
|
#11
|
|
Member
Join Date: Jul-2004
Location: Houston, Texas - I love it!
Posts: 31
|
Quote:
Originally posted by Kevin McRae
What is your substrate?
Bark mulch will keeep up the humidity nicely
|
I am using shredded aspen bedding.
Is the bark mulch safe or better than the aspen?
|
|
|
|
|
08-03-04, 02:13 PM
|
#12
|
|
Member
Join Date: Jul-2002
Location: Edmonton, Alberta
Age: 48
Posts: 1,850
|
If your thermometer is stuck on the side near the top, the floor, where the UTH is, will be hotter than that.
So if you are trying to get a temperature of 85-90 on the thermometer...then how hot is it on the floor where the snake is?
__________________
If there is anything the nonconformist hates worse than a conformist, it's another nonconformist who doesn't conform to the prevailing standard of nonconformity.
|
|
|
|
|
08-03-04, 03:44 PM
|
#13
|
|
Member
Join Date: Oct-2003
Location: Indianapolis, Indiana
Posts: 560
|
You need to measure belly/surface temps - where the snake is since that's the temp they will be feeling. If your gauge is at the top then you can assume the temp on the ground (where the UTH is) is even hotter than what the gauge reads. Which means probably too hot (which can affect the humidity reading). However, since you're using the stick on kind your temps can be way off either direction. Invest in a digital w/ probes as soon as possible. You can even get them with the hygrometer attached. Bed-a-Beast is also good at holding humidity. Also, think about just adding a humid hide.
__________________
1.0 Ball Python "Aragorn", 1.0 Bredl's Carpet Python "Strider"
1.0 Kenyan Sand Boa "Gimli", 1.0 Saharan Sand Boa "Frodo"
1.0 Mexican Black King "Indigo", 0.1 California King "Gentoo", 1.0 Snow Corn "Chile", 0.1 Okeetee Corn "Amazon"
1.0 Crested Gecko "Willow", 0.1 IJ Blue-Tongued Skink "Phoebe", 1.0 Indonesian Blue-Tongued Skink "Cole"
|
|
|
|
|
08-03-04, 04:51 PM
|
#14
|
|
Member
Join Date: Jul-2004
Location: Houston, Texas - I love it!
Posts: 31
|
Quote:
Originally posted by Tigergenesis
You need to measure belly/surface temps - where the snake is since that's the temp they will be feeling. If your gauge is at the top then you can assume the temp on the ground (where the UTH is) is even hotter than what the gauge reads. Which means probably too hot (which can affect the humidity reading). However, since you're using the stick on kind your temps can be way off either direction. Invest in a digital w/ probes as soon as possible. You can even get them with the hygrometer attached. Bed-a-Beast is also good at holding humidity. Also, think about just adding a humid hide.
|
What works well as a humid hide?
|
|
|
|
|
08-04-04, 11:47 AM
|
#15
|
|
Banned
Join Date: Jun-2004
Location: Manitoba
Age: 34
Posts: 637
Country:
|
If your worried about humidity, bark mulch is better then aspen in my opinion.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 03:24 AM.
Powered by vBulletin®
©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.
|
 |
Linear Mode
