My setup

Krissyw84 · 10-25-12, 03:57 PM

I know someone said maybe if they saw my setup they might be able to help me out... well here it is... Would definitely love any advice... He's currently in his favorite hiding spot...

**millertime89** · 10-25-12, 03:59 PM

it'll need a bigger 2nd hide than the skull before too long and more floor space as well. How are you heating the enclosure?

Gungirl · 10-25-12, 04:00 PM

A few things will help you out a lot...

Cover 3 sides of the fish tank with something to give him more security. Don't use a light for heat buy a UTH ( Under the tank heater) and a thermostat to control the heat it puts out. Cover the screen lid with a wet towel or plastic wrap. Change out your substraight to cypress ( it holds humidity better) Don't rely on the stick on thermometers like the ones in the pic.. get a temp gun instead.

After you have done all this your snake will be in a much better home.

Lankyrob · 10-25-12, 04:03 PM

What temps and humidity are you keeping the tank at?

Krissyw84 · 10-25-12, 04:12 PM

Currently I have a light and an UTH for heat. The temp is at 90 degrees right now. But the humidity has dropped down to 40... trying to find my mist bottle now...

Lankyrob · 10-25-12, 04:13 PM

What sort of top have yougot? There is a very good chance that the top is whereyour humiditiy is going and bad air retention+bulb is a killer

Krissyw84 · 10-25-12, 04:17 PM

I have a screen top.. but i put plastic wrap over most of it.. that did the trick til it started getting colder outside...

Lankyrob · 10-25-12, 04:20 PM

Lose the bulb, get an under tank heater and cover the whole top and you will have a better chance.

Best bet would be to get a vivarium rather than a fish tank

**millertime89** · 10-25-12, 04:22 PM

Corrugated cardboard is a fantastic insulator that you can put on 3 sides. Tubs work really well too for both keeping humidity in and holding heat. Switch to cypress, it holds water really well and really helps with the humidity issue. All of my snakes (my BP and corn snake included) are on cypress.

Krissyw84 · 10-25-12, 04:24 PM

I'm currently searching on what type i should get right now. I have seen some good ones that are made out of plastic but I don't see how you'd heat it up and all since you can't put UTH's on plastic.. Can anyone recommend a good enclosure... I want one where I can walk by and peek at him... not really feeling the tubs.. I wanna be able to see him.

**millertime89** · 10-25-12, 04:35 PM

Anyone that says you can't put a UTH on plastic is lying to you. Get a good t-stat and you won't have to worry. I just use clear tubs because I like being able to see my snakes too. Smaller boaphiles or animal plastics are always a good choice. AP is running a sale right now a T8 (48x24x12) for 150 for the T3 (36x24x12) for 175 (cuz that makes sense....)

Krissyw84 · 10-25-12, 04:49 PM

Quote:

Originally Posted by millertime89

AP is running a sale right now a T8 (48x24x12) for 150 for the T3 (36x24x12) for 175 (cuz that makes sense....)

LOL.. I did see their website. I'm thinking about taking that route.

MoreliAddict · 10-26-12, 10:50 AM

Quote:

Originally Posted by Krissyw84

LOL.. I did see their website. I'm thinking about taking that route.

Go for a PVC cage.

A jerry-rigged fish tank is no substitute for a proper, front-opening, PVC enclosure.

You'll have no issues, and you won't be a slave to your mist bottle to avoid them...

mykee · 10-26-12, 11:50 AM

Wow, assuming that chart is correct, I apologize. I was under the impression that glass was a terrible insulator. My apologies.

Lankyrob · 10-26-12, 12:04 PM

Quote:

Originally Posted by mykee

Wow, assuming that chart is correct, I apologize. I was under the impression that glass was a terrible insulator. My apologies.

It goes against anything i have ever read/been told also.