border
sSNAKESs : Reptile Forum
 

Go Back   sSNAKESs : Reptile Forum > Lizard Forums > Varanid

Notices

Closed Thread
 
Thread Tools Display Modes
Old 01-11-03, 04:01 PM   #1
Kyle Barker
Member
 
Kyle Barker's Avatar
 
Join Date: Aug-2002
Location: The Island
Posts: 1,017
Send a message via MSN to Kyle Barker
Savannah Cage?? Goog, Bad?

Here is pics of my savannah's cage. Its 4'L 2'W 2'D. Th dirt is only 5" now but i am putting more in so that it will be a totall of 9" deep, is that enough? The things on top are basking areas and retreats, there are 5 differesnt basking temps on top of that wood thing, the highest being 127f and the coolest being 103f (inside retrea it is much cooler). The othe end of the cage has a mini basking spot that is pretty useless, that side of the cage stays around 81-86f. The water dish wasnt in when i took the pics but it is just a large saucer for underneath flower pots.

The plastic on top of the cage is to keep him from seeing me. He is NOT tame at all, and when ever he sees me through the screen he hides for hours on end. This has been a problem because he wouldnt eat. Anyway he is happy now and doesnt see me, meaning he is finally eating and gaining weight.
Inside the cage.
His retreats.

Thanks for any suggestions on how to make the cage better.


Kyle
Kyle Barker is offline  
Login to remove ads
Old 01-11-03, 05:08 PM   #2
Dom
Member
 
Join Date: Feb-2002
Location: Ottawa
Age: 43
Posts: 2,564
Send a message via MSN to Dom
In order to judge how good the cage is, we would need to know his size..

Chances are theres not enough dirt unless its just a baby .. Temps seem good although I personally would remove the extra small heat lamp and let it drop even a bit lower then 80-85.. maybey in the 70 - 75 area..

I also don't qhuite understand how you set up your heat lamp .. generally the best way is to concentrate teh heat source at one end and let the other end of the cage with no heating in order to create a goood temp gradient..

Over all though its a good start!

Dom




Take care
Dom
__________________
1.3 Coastals 6.6 Jungles
3.4 West Papuan 1.0 Bred'ls
1.1 Yellow condas 0.1 Sebea

**looking for female Bredl's python**
Dom is offline  
Old 01-11-03, 07:04 PM   #3
Kyle Barker
Member
 
Kyle Barker's Avatar
 
Join Date: Aug-2002
Location: The Island
Posts: 1,017
Send a message via MSN to Kyle Barker
he/she is 21". When i take out the third light on the end it is too dark, so maybe ill just put a normal bulb in to make it light but not warm. How much deeper than 9" should the substrate be?
Thanks for all the help.

Kyle
Kyle Barker is offline  
Old 01-11-03, 07:32 PM   #4
V.aw
Member
 
Join Date: Nov-2002
Posts: 187
Kyle, Get a really low wattage bulb or even get yourself a flourecent for lighting purposes. I wouldnt personally drop the temps into the 70's, Only do that in the nighttime.
Keep the temps the way they are, and put much much more dirt in it.. Outdoor dirt. Looks good otherwise, good luck.
V.aw is offline  
Old 01-11-03, 08:45 PM   #5
Kyle Barker
Member
 
Kyle Barker's Avatar
 
Join Date: Aug-2002
Location: The Island
Posts: 1,017
Send a message via MSN to Kyle Barker
how much more dirt? It is outdoor dirt, it is awsome for burrowing in.


kyle
Kyle Barker is offline  
Login to remove ads
Old 01-12-03, 12:57 AM   #6
Dom
Member
 
Join Date: Feb-2002
Location: Ottawa
Age: 43
Posts: 2,564
Send a message via MSN to Dom
Id put as much dirt as you can in there as possible without ruinning your temp gradient ant without bringning your animal too close to the heat lamos..

As for the heat ... he wil do fien with a low 80 but personally I think if u can get it dow to 70-75 in one end its even beter .. its all about giving your animal the choice..
__________________
1.3 Coastals 6.6 Jungles
3.4 West Papuan 1.0 Bred'ls
1.1 Yellow condas 0.1 Sebea

**looking for female Bredl's python**
Dom is offline  
Old 01-12-03, 01:06 AM   #7
Steeve B
Member
 
Steeve B's Avatar
 
Join Date: Nov-2002
Location: Montreal
Posts: 893
Hello Kyle
Aim a little concerned by your lighting system, perhaps if you can drill small hole on the edge of lamp reflector at opposed end and tie them to wire mesh using tyraps, this will prevent any accident shod you monitor jump to the light.
IV seen monitors jump so hard they made the lamp flip on floor with the results you can imagine.
Next I see you’ve used an extension cord for one of your lamps, that’s a no no!
If you can’t change it now, hold the wire in your hand, feel it at different levels if it’s hot dispose of it immediately.
And pleas hook that extension cord properly, I can see an exposed wire on left side lamp?

This is not to criticize you in anyway, (better safe then sorry) Have fun with your monitor
Cheers
__________________
Herpetoculture isn’t an exact science!!
Steeve B is offline  
Old 01-12-03, 01:57 AM   #8
Kyle Barker
Member
 
Kyle Barker's Avatar
 
Join Date: Aug-2002
Location: The Island
Posts: 1,017
Send a message via MSN to Kyle Barker
Thanks for the help. For the lights, here is a pic without the tub lids on As you can see it is all screen so the monitor cant get close to the lights (the lights are at least 3" above screen. I was going to drill holes in them (i did in the black one) but none of them got hot at all so i didnt bother. The wire is caped off, i was taking pics as it was being put together so maybe it was taken before it was finished. I have gotten a licensed electrician to look over all of my cages, and even wire some because I am completely useless when it comes to electrical work. There is also a latch that you cant see in the pics that holds the lid down (preventing escape). For the dirt, i only put the plastic laminate up 10" is that deep enough or should i make it higher? Again thanks for all the help/suggestions.


kyle

Last edited by Kyle Barker; 01-12-03 at 02:00 AM..
Kyle Barker is offline  
Old 01-12-03, 02:14 PM   #9
Steeve B
Member
 
Steeve B's Avatar
 
Join Date: Nov-2002
Location: Montreal
Posts: 893
If you ask me 10in of good dirt is more then an improvement, especially when most peoples still keep monitors on news paper or artificial turf, in a few months your monitor will easily tip your lamps by banging on the screen, don’t chance it secure them. One of my very best friends lost his house in a similar accident the worst part is he almost lost his 2year old son. I don’t want this to happen to anyone, pleas be responsible.
Kind regards
__________________
Herpetoculture isn’t an exact science!!
Steeve B is offline  
Old 01-12-03, 03:12 PM   #10
Kyle Barker
Member
 
Kyle Barker's Avatar
 
Join Date: Aug-2002
Location: The Island
Posts: 1,017
Send a message via MSN to Kyle Barker
OHHH i get it. You meant strapping the lights down to the screen right? Good idea i will do that immediatly. Thanks again for the help everyone!

Kyle
Kyle Barker is offline  
Login to remove ads
Old 01-13-03, 01:20 PM   #11
Ravi
Member
 
Ravi's Avatar
 
Join Date: Nov-2002
Posts: 69
Sav Caging

Hi Kyle

Hows it going? I think you said that your monitor is about 21" TL and the cage is 4' long. It won't take it much longer to become too large for that cage (I know that you already know this).

I would try to keep the lights to one side of the tank. Its an easier way of maintaining a temperature gradient. Just be sure that it has a basking spot that covers the majority of its body and reaches a surface temperature of around 120F at least.

I know that its tough to dig up dirt in the winter so if you have to you can mix soil and sand or use just soil. Its really hard to advise anyone on that kind of stuff because all soils are different and so are everyone else's conditions. That is something you'll need to work out on your own. Around 10 to 12 inches is a good depth.

Have hiding spots on both the cool and warm end of the tank and allow structures in the cage so the monitor will have some starting point to dig from. They don't normally just start digging burrows out in the open.

Other than this you look to be on the right track. Best of luck, Kyle.

--Ravi--
__________________
--Ravi--
The Monitor Spot
Ravi is offline  
Old 01-14-03, 04:33 PM   #12
Kyle Barker
Member
 
Kyle Barker's Avatar
 
Join Date: Aug-2002
Location: The Island
Posts: 1,017
Send a message via MSN to Kyle Barker
Thanks for the help. I do know it will out grow its cage, but i am planing on selling it fairly soon and getting some sort of dwarf monitor (hopefully a pair of red ackies). That is the plan but he is growing on me so i may just have to build a bigger cage. The dirt is almost done every day i have been adding a few inches, and now there is about 2 more inches to go. I have been thinking about putting in some sturdy branches (screwed in of course) for climbing. What are your thoughts on this?

kyle
Kyle Barker is offline  
Old 01-14-03, 05:48 PM   #13
Dom
Member
 
Join Date: Feb-2002
Location: Ottawa
Age: 43
Posts: 2,564
Send a message via MSN to Dom
As for the branches .. I had branches at one point, and My savanahs did climb a bit on them although they are not arboreal and in my oppinion, Branches but cludder and basically, its wasted space for the monitor..

For me anyway .. i find the simpler the cage is the easyer it is to clean and the more space your monitor has..
__________________
1.3 Coastals 6.6 Jungles
3.4 West Papuan 1.0 Bred'ls
1.1 Yellow condas 0.1 Sebea

**looking for female Bredl's python**
Dom is offline  
Old 01-16-03, 12:41 PM   #14
Kyle Barker
Member
 
Kyle Barker's Avatar
 
Join Date: Aug-2002
Location: The Island
Posts: 1,017
Send a message via MSN to Kyle Barker
Cool thanks. No branches then.
Kyle Barker is offline  
Old 01-16-03, 07:01 PM   #15
NiagaraReptiles
Member
 
NiagaraReptiles's Avatar
 
Join Date: Aug-2002
Location: Ontario, Canada
Posts: 672
Just a thought, but why wouldn't you try the branches and let your monitor tell you whether it's a good or bad thing?
__________________
www.NiagaraReptiles.com
NiagaraReptiles is offline  
Login to remove ads
Closed Thread


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:43 AM.

Powered by vBulletin®
©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2002-2023, Hobby Solutions.

right