Got my boa, now for some care questions

[sdiamond808]

Went with a kahl sunglow female, about 1 year old. Couple of questions:

1. Guy tried to sell me a zoomed red night bulb for a little heat at night. I read that the light disrupts them, zoomed bulb claims it doesn't. What is the truth?

2. UVB, I read new information saying they can benefit from UVB, and also that it enhances their color. Any truth to this?

3. LED hoods with blue moon light. Does this interrupt a snakes sleep? They look cool at night, but I do not want to do anything that will mess with it.

4. some care guides are recommending vitamin supplements and calcium with low d3. Do I need this?

5. Also, I read about fluctuating humidity instead of keeping it constant. I am good about keeping it constant but I read this promotes mold. What kind of fluctuations am I looking for and how long at certain levels?

Any help is appreciated. I want to give her the good life.

Thanks,

[ClockwerkBonnet]

I'm not entirely sure I can help you with all five questions, but I can give you advice based on what I have read.

In general, snakes don't necessarily need UVB, but it won't hurt them if you use it anyway.

I don't have experience with mold in reptile enclosures caused by constant spraying, but it can happen when one uses substrates such as aspen shavings.

According to one study, snakes get all the nutrition they need from their diet. Nevertheless, if you do decide to get vitamins with no D3, I would recommend Rep Cal's vitamins.

[sdiamond808]

I appreciate it. Never heard of supplements. Just want her to.be healthy.

[richardhind]

Originally Posted by sdiamond808

Went with a kahl sunglow female, about 1 year old. Couple of questions:

1. Guy tried to sell me a zoomed red night bulb for a little heat at night. I read that the light disrupts them, zoomed bulb claims it doesn't. What is the truth?

2. UVB, I read new information saying they can benefit from UVB, and also that it enhances their color. Any truth to this?

3. LED hoods with blue moon light. Does this interrupt a snakes sleep? They look cool at night, but I do not want to do anything that will mess with it.

4. some care guides are recommending vitamin supplements and calcium with low d3. Do I need this?

5. Also, I read about fluctuating humidity instead of keeping it constant. I am good about keeping it constant but I read this promotes mold. What kind of fluctuations am I looking for and how long at certain levels?

Any help is appreciated. I want to give her the good life.

Thanks,

i wouldn't leave a light on all night in a boa tank, they would hunt in the dark in the jungle except for moonlight , my boas have natural light coming into my snake room so they get a natural day and light cycle
ive never supplementary fed any of boas as im sure they get everything from there prey
i only ever increase humidity when i notice them going into shed a high humidity would cause mold on certain bedding depends what you use , i use orchid bark
hope some of this helps

[sdiamond808]

Originally Posted by richardhind

i wouldn't leave a light on all night in a boa tank, they would hunt in the dark in the jungle except for moonlight , my boas have natural light coming into my snake room so they get a natural day and light cycle
ive never supplementary fed any of boas as im sure they get everything from there prey
i only ever increase humidity when i notice them going into shed a high humidity would cause mold on certain bedding depends what you use , i use orchid bark
hope some of this helps

As far as humidity, the ambient humidity in my house is 50%. Do I need increase it to the 60-70% range only when shedding or should I keep it in that range at all times?

Thanks,

[MDT]

Here is my two cents... less is more.

You can drive yourself crazy trying to adjust every parameter of their environment. That increases the possibility of over-shooting and under-shooting what they need. If your boa is at 50%, and it sheds fine, eats, fine, poops fine, then it's probably fine. If it has a tough shed, soak the snake, and bump humidity.

Supplements not needed and def not worth the time or expense. Everything they need is wrapped up in a little furry rat-shaped package.

Special lights? Not needed. Glass fish tank w screen lid for enclosure? Don't use it. (not saying you are, just general suggestion)... I use an LED strip on a daytime/nighttime timer. On at 0800, off at 1800.

Control hot spot with a radiant heat panel, connected to thermostat with night-time temp drop. Hides on both the hot side and cool side of enclosure. Lots of clean, fresh water (tap is fine- I can't believe the people that give filtered bottled water to their reptiles... they drink out of mud holes in the wild for crying out loud).

Don't over stress about your snake. You'll enjoy it much more.

[sdiamond808]

Originally Posted by MDT

Here is my two cents... less is more.

You can drive yourself crazy trying to adjust every parameter of their environment. That increases the possibility of over-shooting and under-shooting what they need. If your boa is at 50%, and it sheds fine, eats, fine, poops fine, then it's probably fine. If it has a tough shed, soak the snake, and bump humidity.

Supplements not needed and def not worth the time or expense. Everything they need is wrapped up in a little furry rat-shaped package.

Special lights? Not needed. Glass fish tank w screen lid for enclosure? Don't use it. (not saying you are, just general suggestion)... I use an LED strip on a daytime/nighttime timer. On at 0800, off at 1800.

Control hot spot with a radiant heat panel, connected to thermostat with night-time temp drop. Hides on both the hot side and cool side of enclosure. Lots of clean, fresh water (tap is fine- I can't believe the people that give filtered bottled water to their reptiles... they drink out of mud holes in the wild for crying out loud).

Don't over stress about your snake. You'll enjoy it much more.

Thanks. I never thought about a radiant heat panel with a thermostat. I have a basking bulb, but seems like the heat panel might be easier. What kind of LED strip are you using?

[MDT]

It came installed in my Animal Plastics enclosures (LED is a lighting option). Bulbs are terrible. Too hot, can't control heat and dries out enclosure like crazy.

Are using a glass terrarium, or PVC type enclosure?

[sdiamond808]

I have a tetra fona 75 gallon. Glass front open with locking screen lid.

[sdiamond808]

Originally Posted by MDT

It came installed in my Animal Plastics enclosures (LED is a lighting option). Bulbs are terrible. Too hot, can't control heat and dries out enclosure like crazy.

Are using a glass terrarium, or PVC type enclosure?

I have a tetra fona 75 gallon. Glass front open with locking screen lid.

[MDT]

Originally Posted by sdiamond808

I have a tetra fona 75 gallon. Glass front open with locking screen lid.

Your temp and humidity control will be difficult. Glass is not a great insulator. And you will need to use plexiglass or something to block off most of the screen top to retain humidity.

You may want to consider something like Animal Plastics, Boamaster. Prob not an expense you counted on since you already have the 75 gal terrarium, but if I'm being real, you probably should've researched a bit more on the husbandry side? It's not impossible w what you have, but it will be challenging.

Look at Herpstat or Reptile basics for a good thermometer. You can often find them for sale on the FB reptile pages, or Fauna. Same with the heat panels. Pro Products is regarded as very reliable.

[sdiamond808]

Originally Posted by MDT

Your temp and humidity control will be difficult. Glass is not a great insulator. And you will need to use plexiglass or something to block off most of the screen top to retain humidity.

You may want to consider something like Animal Plastics, Boamaster. Prob not an expense you counted on since you already have the 75 gal terrarium, but if I'm being real, you probably should've researched a bit more on the husbandry side? It's not impossible w what you have, but it will be challenging.

Look at Herpstat or Reptile basics for a good thermometer. You can often find them for sale on the FB reptile pages, or Fauna. Same with the heat panels. Pro Products is regarded as very reliable.

I have a few good thermometers and hygrometers already. Thermal gradient is good, but I am having to mist 2 times a day to keep the humidity right. The basking bulb lights up half of it good, but it seems dark on the cool side. Are there any kind of LED setups I can get that will brighten it up on the other end during the daytime?

[PanUzasny]

I'm new to the hobby, but I recently purchased an LED Shop Light to put in my 40 gallon enclosure. It lights it up pretty nicely. It's probably not the best solution, but it works and is what I can afford right now. Maybe this will give you some different lighting ideas for your enclosure.

https://www.homedepot.com/p/Commerci...0-HD/305059320

[sdiamond808]

Originally Posted by PanUzasny

I'm new to the hobby, but I recently purchased an LED Shop Light to put in my 40 gallon enclosure. It lights it up pretty nicely. It's probably not the best solution, but it works and is what I can afford right now. Maybe this will give you some different lighting ideas for your enclosure.

https://www.homedepot.com/p/Commerci...0-HD/305059320

Do you just lay it on top of the screened lid?

[PanUzasny]

I have it "mounted" inside the enclosure. The light is just about the perfect size to wedge between the two sides of my enclosure. I was initially thinking of using command strips to mount it either to the lid or the side of the enclosure.