View Full Version : Ball Python Enclosures
Snakefood
10-31-12, 09:48 PM
is it better to put the vent holes at each end (sides of enclosure) or two at the back, or does it really matter??:wacky:
this enclosure will be 2 enclosures, stacked, with a heat pad under a vinyl? tile floor and plexi-glass front (if it matters)
DeesBalls
10-31-12, 10:12 PM
I put one on each side and 2 on the back.
Snakefood
10-31-12, 11:03 PM
and what diameter do you use??
DeesBalls
10-31-12, 11:16 PM
2 inches.... my cages are 36''x18''x12'' and i do 4 total vents.
Snakefood
10-31-12, 11:19 PM
ok those dimensions are close to the enclosures I'm making up, so I'll go with that. Thanks
DeesBalls
10-31-12, 11:19 PM
no prob... make sure to post some pics.
Snakefood
10-31-12, 11:32 PM
I will, don't plan on them being completed till closer to the end of November though!!
The number and diameter of holes you put in your bins will be unique to YOUR environement. You cant take someone elses advice on this; no two houses are the same; different airflow, temps, humidity, barometric pressure, etc.
Snakefood
11-01-12, 09:03 AM
ok, that makes sense, so what start with 2 holes and go from there??
Gungirl
11-01-12, 09:06 AM
When I built my GTP's cage I was worried about having to much or not enough vents. I did 4 to start. I cut them and bought vents that I could add caps to in case I wanted to seal some off. I figured better to have to many rather than have to put my snake in another viv and cut more. I did leave all 4 vents for the spring and summer but now the fall and winter I have capped off 2 holes. I think this is a great way to go...
Snakefood
11-01-12, 09:07 AM
Awesome idea gungirl!!!
DeesBalls
11-01-12, 09:10 AM
I would agree with gungirl... its easier to cap some holes off, rather than add holes once the snake is inside the enclosure...
Snakefood
11-01-12, 09:12 AM
definately, the vents I was looking at didn't have caps, but I am sure I'll find those, just have to go to the bigger hardware/building stores out of town!
DeesBalls
11-01-12, 09:14 AM
I'm sure Lowes or Home Depot will have something you can use.
Snakefood
11-01-12, 09:16 AM
we dont have lowes (we have Rona!), but we have a home depot in Abbotsford, I'll check it out.
DeesBalls
11-01-12, 09:20 AM
Oops, i didn't see you were in Canada... :P
vBulletin® v3.8.7, Copyright ©2000-2025, vBulletin Solutions, Inc.