bp in rubbermaid

[snakefein]

where should i make my holes at and where it is a 31 qt or 29 liter tub

[mykee]

Around the top about 1-3 inches down, maybe 3 or 4 on the front and back, and 4-6 on the two sides.

[snakefein]

so i do not put any holes in the top of the lid

[HetForHuman]

nope no need to have any in the lid..

[justinO]

I just put mine wherever I feel like at the time. As long as there's enough air flow going through and the humidity stays at a good rate, everything should be fine!

Just get a drill and start drillin', don't forget your pilot holes!
;)

[mykee]

3/8" drill bit seems to work best BTW.....

[snakefein]

thanx i drilled a line of three holes down from the top all the way across on one long side then three holes up from the bottom on the other long side all the way across then probably 10 holes in different places on each short end now i just need to get the set up inside ight and wait for my little male to be ready