Ventilation Question

[Bighead]

I'm switching my bp over to a big rubbermaid thing tonight. I was wondering if any of you had suggestions on where to drill the vent holes and how many I should drill. I will be using a 1/4" bit and the dimensions are about 30" x 14" 14". Thanks.

Jordan

[Auskan]

I drilled close to the top, just under the ridge. I don't know how many, but I kind of drilled in a zigzag pattern, with the two layers of drill holes about 2" apart, and the top holes about 1" apart, while the bottom holes are about 2" apart. I did it all the way around, so there is "some" cross ventilation.

[mykee]

I use the 34x17x6 rubbermaids, and I use a 3/8 inch bit, and drill one hole, about 2 inches from the lid, every 5 or so inches, so I have around 30 holes in my rubbermaids.