PIcs/ quick how to of my rack..

[Dom]

Alright .. This is my first rack ever .. My dellema was building something that looked nice .. I HATE the melanine look ..

So after lots of shopping for containers I decided on building a rack with the blueish/clear containers.. something I could see inside wiht a flashlight but if i walked in front, it would not disturb the snakes..

Heres some of the containers .. and other things like dimers and other crap..

http://www.ssnakess.com/photopost/data/504/55containers_and_meterial-med.jpg


So heres is my dellema .. I wanted to build a rack with 25 small shobox size.. 8 large shobox size and 4 large cages.. so I search for containers with similar dimensions that would work close enough .. the problem is they were not perfect wich meant I had to build little slides with wood to make sure they always fit perfectly .. word of advise.. its WAY WAY easyer to build a rack with all the same size containers..

Here's what it looks like half way done - its upside down .. easier to built this way..

http://www.ssnakess.com/photopost/data/504/55half_rack_-med.jpg

As for heating .. I am using heat rope I got from PCPC .. its 80 watts, 28 feet of heating (I have 3 in there) .. Works great .. just not sure for how long it will last.. hope fully a few years..

I simply used a router .. digged 2 chanels for the shoe boxes.. and 3 for the large ones on the bottom and covered it with silicone.. works GREAT.. i have a temp gradient of 18 degrees in the small shoe box.. I am very impressed with the heat cable..


And after putting wheels and the finishing wood.. the heat cable and such this is what it looks like..

http://www.ssnakess.com/photopost/data/504/55finished_rack_-_front_view-med.jpg

side view.. (the ones with the wittish color are simply filled with humidity .. new mulch..)

http://www.ssnakess.com/photopost/data/504/55finished_rack_side_view-med.jpg

The wood used was a beech finish .. its 45 inches wide.. 17 inches deep and hmm almost 60 inches high..

Tx for looking

[Matt_K]

Looks Great Dom!! Do you have any pics of where you routered for the heat rope?? Im curious to see how you ended up going about that after talking with you about it at the show. Its good to hear that the rope is working good for you!!

[Tim_Cranwill]

Nice work Dom! I would have loved to make a rack that doesn't require me to use lids on my bins, but with 3 kids under the age of 4, that's not a great idea for me just yet! :)

Thanks for the pics bro!

[Dom]

Tx Matt and Cranwill..

This is the only pic I have.. u can see the chanells.. babically the wire fits int eh hole.. and i silicone the top .. 2 channels for all the shoebox size and 3 for the large ones..

http://www.ssnakess.com/photopost/data/504/55wood-med.jpg

[Bryce Masuk]

dom what did it cost for the heat cable? do you find it works better then heat tape?

[Dom]

Tx Whitewolf ..

Bryce.. I have never used heat tape so can't comment on it but the heat rope is about 50-60$ give or take (2$/foot) .. depends where u get it..

Its easy to use // cheaper then heat tape.. all ready to go .. no electrical BS but U CAN"T CUT it... wich means u need t o have excacly the right amount.. or need to make it fit for you..

I personally think it worked out great..

[nuno]

Looks great Dom. what temps are you getting with that heat rope?

Thanks, Nuno

[Dom]

lol too hot! I am getting a hot spot of 105 and a low of about 85 with the heat tape at full capacity ..

I turned it down with a dimer// great gradient..

[Emily-Fisher]

Ooh! Nice racks :) very complete ;)

[JD@reptiles]

That looks better than my rack. Great job Dom :D they are fun to make. i loved making mine. what wat the total cost of that?

Thanks for sharing :)

Jordan

[reptilesalonica]

Great job Dom. I didn't see any wheels but i suppose it's in the "to do list".

[Mardy]

Very nice I have to get over and copy it. I'll p/u some heat rope from pc when I go down in a couple of weeks.

MArdy

[asphyxia]

Nice Work and design Dom

not quite as nice as Pamala Andersons rack but still a nice set..up


Cheers
Brian

[Dom]

lol Funny guys! ..

IT is on wheels actually .. u just don't see them :)

Come over when u want Mardy!

Tx for all the compliments guys..

[Dom]

ohh ****.. and the toal cost for Heating .. containesrs .. wood and other lil crap was about 350$.. 37 cages.. 25 small.. 8 medium and 4 large..

[Lisa]

Looks pretty good dom where did you get your bins from?

[Dom]

All from Crappy Tire.. not on sale really though .. like 239 for small.. 4.29 meds and like 8 for the large.. they were the right size and color though ..

[Lisa]

What is the size of the bins? dimensions and volume pls

[matt_winter]

pretty cool

[lynsey_togofire]

just one question...how do the snakes breath??? do you drill holes in the boxes? it is a great design! i love the look of it, but that was my only question. other then that, good work!

lynsey:)