New setup done.

[Brian Petersen]

It´s hard to come by a good Enclosure here in Denmark so I had to make them myself.

Kind regards

Brian Denmark

[Linds]

Very nice! Details?

[Yve]

Nice work! Sort of what I had in mind for the future. How do you lock the glass?

[Brian Petersen]

Hi´
i´ll post in the weekend because, i dont have time before that.
Linds: what kind of Details are you looking for?
Yve: I´ll post pic in the weekend ok?

Kind regards

Brian
Denmark

[Linds]

Materials, dimensions, that sort of thing ;)

[Brian Petersen]

Hi´I´m Back

Linds: I use what i think i called plywood in the Canada/ US??
dimensions of each Enclosure is 100cm w X 70cm d X 50cm h. I use 16mm wood and then seal the corners with silicone, and paint the whole thing with paint that we in Denmark use in bathrooms, so it can take the humidity aroud 80%. To Heat the whole thing i have put a lamp with 25W in each Enclosure, thats enough to have a hotspot thats about 31-32degrees Celcius and 26-27 in the cold end. I have also attached a lightdimmer so the whole dosn´t overheat on a warm sommerday....Enough?

Yve: Take a look at the pic, that will show you how I did. I hope you can see it. else ask again..

Kind regards

Brian
Denmark

[Linds]

Thanks Brian :)

[Brian Petersen]

Your welcome Linds......

Kind Regards

Brian
Denmark

[Yve]

I can see it...but i still don't get it!:o
thanks for the pic though!:) think you can explain it to me?

[Brian Petersen]

Hi´ Yve.

look at the pic i´ll post. that will show you how I made the locking metal, and the next pic will show you how to attach it.

Kind regards

Brian
Denmark

[Brian Petersen]

here you can see that it´s between the glass. It´s actually just a straight S and then a longer piece that will lock the glass.

[Yve]

gotcha! thanks!!:)