Need a Snake Enclosure Lid Rec.

[Derek1]

I was given what I believe is a 29gall tank. Which I put a juvenile King in. This lid that came with it doesn't fit securely and she can get out at the corners. So I have her in a large critter cage for now.

Need a good recommendation with good tight corners. The top opening of the tank measures 30 1/4" x 12 3/4"

[Jim Smith]

You can purchase the screen lids with clips. You really need the clips because your snake will eventually push the lid up and escape. The total cost should be under $20. They are usually available at your local Petco or other large pet shop or you can buy them online.

[drumcrush]

Mine for my garter is a little wiggly but I locked it down with clips, haven't had a problem

[Derek1]

It's easier for me to order from Amazon Prime than drive 20 miles to Pets Mart.

Trying to link one I found on Amazon but it says post denied. Won't let me link it. Can't post pics either.

[millertime89]

Screen shot (PrtScn button), paste to MS Paint, upload.

[Derek1]

After searching the forum, I realized I didn't have enough post to link sites or post pics.

Amazon.com : Zilla 11897 Fresh Air Screen Cover, 12-Inch by 30-Inch : Pet Habitat Screen Covers : Pet Supplies (http://www.amazon.com/Zilla-11897-Screen-12-Inch-30-Inch/dp/B000QFQ300/ref=sr_1_1?ie=UTF8&qid=1411409278&sr=8-1&keywords=zilla+11897)

[CosmicOwl]

I'm not sure what to suggest. For a king, you might be better off just getting a large tub with a secure lid than fussing with this tank you got for free.